PASSIVE HOUSE 2

House planned on two levels, with a floor area of ​​60.48 square meters on the ground floor and 34.56 square meters on the mezzanine
Internal distribution planned at the Pt: entrance, living room, kitchen, bathroom, bedroom and bedroom
Mezzanine used as study and bedroom (bathroom possible)
External space: open space of 31.23 m2 equipped with sliding doors and sunshades on the ceiling, pergola of 27.06 m2 with sunshades on the ceiling
External platforms in treated wood
Supporting structure in lamellar beams 300 × 300 mm or 400 × 400 mm (depending on the type of insulation required)
– Perimeter cladding with pre-assembled modules 3600x1200x300 mm (or 400 mm)
-a sandwich of composite material in wood “Laminato Veneer Lumber”, thickness 25mm
-with structural stiffening crosspieces positioned every 1200 mm
– inspectable side for implant positioning / modification
– internal box material: EPS insulation: 250 mm thickness for the 300 mm version or for the 400 mm version: 350 mm thickness
– (as an alternative to EPS: rock wool, materials of natural plant / animal origin, cork, clay)
-internal boards 120 mm thick, consisting of a sandwich of ‘Veneer Lumber Laminate’, 25 mm thick and 70 mm of EPS insulating material
No thermal bridges at the ceiling / wall / window nodes
-Loss of only 0.11W / mqK (expected in the design phase): less than 15 kWh / mq consumed per year.
Assembly
– interlocking joints are provided for the supporting structure with wooden fixings
-assembly with screwing for external / internal cladding on wooden guides
– type of assembly that allows a removable / reusable solution as well as 100% recyclable.
Endowment
– photovoltaic and solar thermal system
– home automation systems
– Possible addition of a heating system in addition to the fireplace with hot water production
Roof
-Wood outlets